Who We Are About Meet The Team News Boards Kremer Digital Office Signage Commercial & New Homes Case Studies Videos Testimonials Contact Kremer Connect Login Get a Quote
BLOG

Reception Signs: Materials, Lighting and Fixing Options

27 October 2026

The sign on your reception wall is the first thing a visitor sees inside your office, and in a high street branch it is often visible from the pavement through the window. That makes it part of your frontage as well as your interior, and it should match the fascia outside in colour and finish. We make reception signs as internal wall logos, in acrylic, built-up stainless steel or a fret-cut aluminium tray, lit or unlit, in any RAL colour. This post goes through the choices in the order you are likely to make them.

Start With the Wall

Before choosing a material, look at where the sign will go. The best wall is usually the one a visitor faces on the way in, and in a branch it helps if that wall can also be seen through the window from the street.

Measure the wall and note anything that interrupts it, such as light switches, sockets, radiators or a door frame. Leave clear space around the logo, and think about where people will stand to read it. A logo seen across an open office from the front door needs larger lettering than one seen from the chair in front of the desk. Our design team can produce a visual of the sign for approval before anything is made, which is the easiest way to check the size against the wall.

Materials

Acrylic Lettering

Acrylic is cut to the shape of your logo and lettering in your brand colours. It is light, has a clean edge and suits most offices. It can be fixed flat to the wall or raised on studs and cups.

Built-Up Stainless Steel Letters

For a heavier, more solid look, we build your logo or text in stainless steel and cap it in any RAL colour. Built-up letters have depth and can house LEDs for halo lighting, which is covered below.

Fret-Cut Aluminium Tray

An aluminium tray, powder coated in any RAL colour, is fixed to the wall. Your name or logo is cut out of its face and backed with opal acrylic, in white or a colour, and an LED light sheet behind the tray lights the cut-out areas. The result is a panel-style sign with the logo framed by the tray, which suits a wall where a single block of colour works better than loose letters.

Fixing: Flat to the Wall or Standing Proud

Acrylic letters can be fixed directly to the wall, which gives a flat, tidy finish and suits a narrow space or a wall that people brush past. Fixed on studs and cups, the same letters stand proud of the wall and cast a slight shadow, which adds depth without any lighting.

Built-up letters and trays are heavier and need fixings that suit the wall behind them, whether that is solid masonry or a stud partition. Our installation team identifies any restrictions during the survey, before anything goes up.

Lighting: Halo, Lit Tray or Unlit

An unlit sign relies on the room's own lighting and works well on a wall that is already bright. If the wall sits in shadow, or you want the sign to read from the street after dark, lighting is worth considering.

Halo lighting suits built-up letters. The LEDs sit inside each letter and shine back onto the wall, so a glow frames the lettering, in almost any colour you choose. If you want the letters themselves to light up as well, their faces can be made in push-through acrylic. You can see the effect on a fascia on our LED halo page, and it works the same way on a reception wall.

A fret-cut tray is lit from behind by its LED light sheet, so the logo glows through the face of the panel while the tray around it stays solid colour.

A lit sign needs a power supply at the wall, so plan where the cable will come from before the wall is decorated. We test the electrics in our factory and again when the sign is installed.

Matching the Fascia

Use the same colour references inside and out. We match wall logos to the RAL colour of your branding, so the reception sign and the fascia come out the same colour. It also helps to repeat the lighting method: if your fascia is fret cut and lit, a fret-cut tray inside carries the same look through the door, and halo letters on the fascia pair naturally with halo letters on the reception wall.

A Wall Map Beside It

A wall map of the area you cover works well beside the reception sign. It shows visitors the extent of your coverage and your knowledge of the area. We make wall maps in three ways: printed directly onto Dibond and fixed with steel spacers at each corner; in acrylic with a vinyl overlay, for maps people touch often; or as a flex face map, a printed skin tensioned on an aluminium frame around 100mm from the wall and lit from behind by an LED light sheet. The flex face skin can be replaced if you want to show a different area later.

The same options suit a marketing suite on a new homes development, where the reception wall carries the development's brand. If your reception sign is part of a new office, our post on signage for opening a new estate agency branch covers the rest of the list.

Plan Your Reception Sign

To plan a reception sign for your branch, contact our team with a photo of the wall, its measurements and your brand colours, and we will suggest options and send you a quote.

← Back to The Kremer Journal
Talk to us

Contact us today